High Quality Multiple Spindle CNC Garage beam Drilling Machine
GSWZ1500/3 CNC Beam Drilling Machine with high speed I .Machine application: The machine is mainly used for drilling of large H Beam U-beam and square beam. Three drilling spindle box position and feeding is driven by servo motor, controlled by CNC system. and dolly feeding controlled by CNC ,...
GSWZ1500/3 CNC Beam Drilling Machine with high speed
The machine is mainly used for drilling of large H Beam U-beam and square beam. Three drilling spindle box position and feeding is driven by servo motor, controlled by CNC system. and dolly feeding controlled by CNC , with high efficiency and high precision, widely used in building ,bridge and other steel structure industries .
Machine structure and configuration:
1.Machine is mainly composed of bed, CNC slide table (three pcs), drilling spindle boxes (three pcs), tool changer (three), clamping device, detection device, CNC control feeding dolly , cooling system, chip cleaner etc.
2.The bed is square steel tubes welded together and done strengthen to the larger force structure of the bed, the completion of the weld artificial aging treatment, which ensure the stability of the bed well, thus ensure the accuracy of the entire machine.
3.Three pcs of CNC slide tables, respectively , located in fixed side , moving side and middle ,with same structure , all composed of slide carriage, sliding table, and servo driving system. Three sliding table have a total of six CNC axes, including three CNC feeding axes and three CNC positioning axes, each of them adopts precision linear rolling guide , driven by AC servo motor & ball screw, which ensure the positioning accuracy well.
4.Equipped with three pcs of drilling spindle boxes, respectively, installed on the three CNC sliding table, do drilling in horizontal and vertical directions. Each drill spindle box can drill independently, also can drill at the same time.
5.Spindle adopts precision spindle, high-precision rotation, high rigidity. Equipped with BT40 taper, tool change easily, can clamp twist drill and carbide drill bit, with large application scope. The spindle adopts variable frequency control motor driving , for a wide range of using . Rotation speed is stepless adjustment, in large range, to meet variable rotation speed demand.
6.Work piece fixing adopts hydraulic clamping, total with five hydraulic cylinders, do horizontally clamping and vertical clamping separately. Horizontally clamping is composed of fixed side datum and moving side clamp, the fixed side datum keep fixing, moving side clamping move slide table driven by a large cylinder, the linear guide guiding ,moving to the fixed side to realize workpiece horizontally clamping ; the vertical clamps , install on the fixed side and moving side , 2 pcs on each side , do up and down moving on four space through relative cylinder drive the lever. To do vertical clamping for workpiece.
7.This machine is equipped with work piece width detection and web height detection device, which can effectively compensate the deformation of the work piece to ensure processing accuracy; the two detection devices both adopt wire-actuated encoders, easy installation.
8.Adopts trolly feeding, driven by servo motor via reducing the speed through gear and rack .
Equipped with laser alignment device, can detect work piece when workpiece feeding , then do feedback ,to realize workpiece precision positioning .
9.Cooling systems: Adopt atomization cooling ,with the function of inner and outer cooling , each drill spindle box all equipped with outer cooling nozzle and inner cooling pipe joint, which can be chosen as per drilling demand , and be using or simultaneously.
10.Chip cleaner : Adopt swivel caster as guide, carry easily.
Main technical parameter:
1.1 H Beam. Height of section H: 150-1500mm Wing width B: 80-800mm
1.2 U Beam Height of section H: 150-1500mm Wing width B: 50-400mm
1.3 Square Steel: Width： 150～1500mm Height：50～400mm
1.5 Maximum thickness of workpiece : 60mm
2 Drilling power box:
2.1 Quantity : 3
2.2 Maximum drilling dia. ￠40mm
2.3 Spindle taper : BT40
2.4 Motor power of spindle ：3x11 kw
2.5 Spindle rotation speed (stepless adjustment) 30-3000r/min
3. Tool changer
3.1 quantity : 3
3.2 tools quantity: 3x4
4 CNC Axes:
4.1 Quantity: 7
4.2 For fixed ,moving ,mid side
Feeding servo motor power :3x2 kw
Positioning servo motor power :3x1.5 kw
4.3 Moving speed of three position CNC axes: 0-10m/min
Moving speed of three feeding CNC axes : 0-5m/min
4.4 Width detection stroke : 1350mm
Web detection stroke: 340mm
5 Feeding dolly:
5.1 Servo motor power : 5kw
5.2 Maximum feeding speed : 20m/min
5.3 Maximum feeding weight 10t
6In /out feeding path
6.1 Through Max. Workpiece length: as buyer’s request
6.2 Through Max. Web of workpiece: 1500mm
7. Atomizing cooling system
7.1 Nozzle quantity: 3
Pressure of compressed air: 0.5MPa
7.2 Cooling method : inner & outer cooling
8. Host machine overall dimension (L x W x H) : about 6.5x1.6x3.4m
9. Host machine weight : about 19000 kg
Main outsourcing components :
Main hydraulic control components
Note: The above is fixed supplier. If the supplier could not supply the components in case of any special matters, we will adopt same level components ,but the quality is no worse than the above.
Accessories and spare parts list
Pipe joint 12.5
Hose clams 25
High pressure hosepipe assembly
1. Working power: Three phase four wire system 380±10%V 50±1HZ
2. Working temperature： 0°C-40°C
3. Humidity of environment： ≤75%
We take pride in introducing us as one of the leading manufacturers and suppliers of high quality multiple spindle cnc garage 3d drilling machine to you. Providing you with customized service and low price, we warmly welcome you to check the quotation with us.